Connect with us

Astar Sportback Eco V-LL 5W30

It has excellent lubrication properties to withstand the additional load, from the system injector unit reducing friction and increasing wear resistance at elevated temperatures. 100% synthetic lubricant with high quality synthetic base oils, formulated with PAO and Group III synthetic base oils with specific additives of last generation to meet the most demanding standards presented, suitable for use in modern gasoline and diesel VAG group (VW, Audi, Seat and Skoda). It is suitable to meet the new specifications for VW 504.00/507.00 VW AG with pump injector system. Can be used in all vehicles where they are required earlier with VW specifications: 501.00, 502.00, 503.00, 505.00, 505.01, 506.00, 506.01. (Except the Touareg R5 and V10 models, which must use 503.00, 506.00 and 506.01).

It has excellent lubrication properties to withstand the additional load, from the system injector unit reducing friction and increasing wear resistance at elevated temperatures. Suitable for engines compliant environmental impact EURO IV and EURO V, which are fitted with Diesel Particle Filter (DPF) to obtain a reduction of gas emissions, and thus contributing to environmental conservation. This lubricant is suitable to the requirements necessaries to lubricate vehicles which incorporate emission regulation in gasoline / diesel that require the use of oils that meet the ACEA C3, low sulphur, sulphated ash and phosphorus (Mid SAPS).

Its special design on the viscosity grade (5W30), lets you obtain significant savings in fuel.

Specifications

  • ACEA C3-12 - VW 504.00 / 507.00
  • BMW Long Life-04
  • MB 229.51
  • Porsche C30

Packaging

Packaging Astar Lubricants
Astar Sportback Eco 5w30 Lubricante
Analysis Type Method Results
Grade SAE 5W-30
Viscosity at 100º C. (cSt) ASTM D – 445 9.30 - 12.50
Viscosity at -30ºC. (cP) ASTM D – 5293 <6600
Viscosity HTHS at 150ºC. ASTM D – 5481 >3.5
Viscosity Index min. ASTM D – 2270 154
Flash point (ºC) ASTM D – 92 228
Pour Point. (ºC) ASTM D – 97 -45
Sulphated ashes (% weight) ASTM D – 874 <0.8
TBN mg KOH/g ASTM D – 2896 >6

The data provided are based on standard tests in laboratory conditions and serve only as a reference point. This data sheet and the information contained herein are valid on the date of issue.

Safety data sheets are available on request in order to provide up-to-date information. The company can not be held liable for damage caused by misuse of the product and in case of non-observance of the specified precautions.